Home TORPEDO MARINE ALUMINIUM SILVERGLO

TORPEDO MARINE ALUMINIUM SILVERGLO

Torpedo Marine Aluminium Silverglo

  • Premium grade enamel paint based on a modified resin system and metallic aluminum pigments
  • Forms a tough durable and hardwearing finish
  • Exhibits excellent flow, hiding power and good gloss retention properties

Designed use

Designed Use:

  1. It is strongly recommended as Enamel for interiors and exterior conditions as a top coat
    1. Wooden surfaces: doors, windows, furniture and cabinets
    2. Metals structures: grills and masonry walls

Availability:

  1. Available only in metallic silver

Coverage:

  1. The theoretical coverage of TORPEDO MARINE ALUMINIUM SILVERGLO would be approximately 8 – 10 M²/liter at a Dry film thickness of 30 – 40 µ

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation

Surface preparation:

    1. Avoid humid conditions >95% and also dew point of <3% for application
    2. The expected life span is directly related to the surface cleanliness and proper application.
    3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
    4. Wooden surfaces:
      1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
      2. ROBBIALAC WOOD PRIMER should be used to provide through binding of TORPEDO MARINE ALUMINIUM SILVERGLO top coat
    5. Steel and other metals:
      1. TORPEDO MARINE RED OXIDE PRIMER/ MARINE ZINC CHROMATE PRIMER is used as initial surface preparation to provide anti-rust properties
      2. TORPEDO MARINE UNDERCOAT should be used to provide through binding properties for TORPEDO MARINE ALUMINIUM SILVERGLO top coat
    6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.

Thinning recommendation:

  1. ROBBIALAC G.P THINNER and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes:

  1. Available in metal tins of 4L packs
× Lets Chat