Weather Coat
- High quality co-polymer based latex paint formulated with Titanium dioxide and other light fast pigments
- Excellent smooth and matt finish
- Good scrub resistance, wash ability and good durability
- Good resistance to algae, fungi and other harmful elements of the atmosphere
Designed Use:
Recommended for exterior use
Availability:
- As per BERGER shade card
Coverage:
- The theoretical coverage of ROBBIALAC WEATHER COAT would be approximately 7 – 9 M² liter at a Dry film thickness of 30 µ.
*Due consideration must be given to the evenness of the surface and the nature of the substrate
Surface preparations:
- The surface to be painted needs to be clear of all grease, laitance and fungal growth
- For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected area.
- STUCCO PUTTY-EXTERIOR can be applied to fill all cracks and surface undulation for smooth surface
- We recommend applying one coat of ROBBIALAC ACRYLIC PRIMER UNDERCOAT WHITE to provide thorough binding of ROBBIALAC WEATHER COAT top coat
- Two to three coats of ROBBIALAC WEATHER COAT can be applied as required, giving three to four hours gap between coats
- Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application
- To keep the brush/roller and spray equipment in good condition for use, clean the same in Luke warm water and dry them immediately after application
Thinning recommendation:
- Soft water and to the extent of maximum of 10% of the paint by volume.
Pack Sizes:
- Available in plastic pails of 4/20 liter packs