Robbialac Speedkote Road Marking Paint Chlorinated Rubber Based
- Based on a synthetic alkyd system modified with Chlorinated based Resin with Titanium Dioxide and other light fast pigments with tough extenders
- Quick drying and good build up
- Resists gasoline, oil, water and does not bleed on asphalt
- Good weathering properties
- long lasting coating with good toughness
Designed Use:
- It is recommended for exterior coatings on asphalt roads, krebstone pavements, and runways
Availability:
- As per customer requirement.
Coverage:
- The practical coverage of ROBBIALAC SPEEDKOTE ROAD MARKING PAINT would be approximately 6- 8 M² /liter at a Dry film thickness of 75 µ.
*Due consideration must be given to the evenness of the surface and the nature of the substrate.
Surface Preparation:
- Avoid humid conditions >95% and also dew point of <3% for application
- The expected life span is directly related to the surface cleanliness and proper application.
- Ensure that the surface to be painted is free from dust, and other loose flakes that would be detrimental in the proper application
- Apply a dilute first coat of the ROBBIALAC SPEEDKOTE ROAD MARKING PAINT evenly on the surface for giving a good penetration to the porous surface and finishing with a heavier coat as required
*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application.
- To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.
Thinning recommendation:
- ROBBIALAC INDUSTRIAL THINNER and to the extent of maximum of 5-10% of the paint by volume.
- Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.
Pack Sizes:
- Available in metal tins of 4L