Shield Emulsion
- Water based acrylic paint
- Proven to be very versatile
- Great for economical use
- Gives a smooth and excellent matt finish on various substrates
Designed Use:
- Recommended for interior applications only
Availability:
- It is available in white and various shade range as per BERGER shade card
Coverage:
- The theoretical coverage of ROBBIALAC SHIELD EMULSION would be approximately 6-7 M²/liter at a Dry film thickness of 25 µ.
*Due consideration must be given to the evenness of the surface and the nature of the substrate.
Surface preparations:
- The surface to be painted needs to be clear of all grease, laitance and fungal growth
- For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected areas.
- STUCCO PUTTY-INTERIOR can be applied to fill all cracks and surface undulation for smooth surface
- We recommend applying one coat of ROBBIALAC SHIELD EMULSION WHITE (diluted to 15% of total paint volume) as a first coat to provide thorough binding of final SHIELD EMULSION top coat
- Two to three coats of SHIELD EMULSION can be applied as required, giving three to four hours gap between coats
- Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application
- To keep the brush/roller and spray equipment in good condition for use, clean the same in Luke warm water and dry them immediately after application
Thinning recommendation:
- Soft water and to the extent of maximum of 10% of the paint by volume for final coat.
Pack Sizes:
- Available in plastic pails of 4/10/20 liter packs