Home ROBBIALAC SHIELD ALUMINIUM SILVERGLO

ROBBIALAC SHIELD ALUMINIUM SILVERGLO

Shield Aluminium Silverglo

  • Standard /Economical grade enamel paint based on a modified resin system and metallic aluminum pigments
  • Forms a durable and hardwearing finish
  • Exhibits good flow, hiding power and good gloss retention properties

Designed use

Designed Use:

  1. It is strongly recommended as Enamel for interiors and exterior conditions as a top coat
    1. Wooden surfaces: doors, windows, furniture and cabinets
    2. Metals structures: grills and masonry walls

Availability

  1. Available only in metallic silver

Coverage:

  1. The theoretical coverage of ROBBIALAC SHIELD ALUMINIUM SILVERGLO would be approximately 7 – 8 M²/liter at a Dry film Thickness of 30 – 40 µ

Surface preparation

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness
  3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
  4. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC WOOD PRIMER should be used to provide through binding of ROBBIALAC SHIELD ALUMINIUM SILVERGLO top coat
  5. Steel and other metals:
    1. ROBBIALAC SHIELD RED OXIDE PRIMER/ ZINC CHROMATE PRIMER is used as initial surface preparation to provide anti-rust properties
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding properties for ROBBIALAC SHIELD ALUMINIUM SILVERGLO top coat
  6.  Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the          procedure described above.*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Thinning recommendation:

 

  1. ROBBIALAC G.P thinner and to the extent of maximum of 10% of the paint.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2.  To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P thinner and dry them

Immediately after application.

Pack Sizes:

  1. Available in metal tins of ½, 1 and 4 liter
× Lets Chat