Home ROBBIALAC ROOF PAINT (ENAMEL)

ROBBIALAC ROOF PAINT (ENAMEL)

Roof Paint (Enamel)

  • Enamel paint based on a Synthetic Alkyd Resin
  • Rust inhibitive pigments that provide reasonable protection to the Metal Sheets on the Roof
  • The product has good coverage and upon drying it forms a tough film that is long lasting and holds good weathering properties
  • It can be applied on suitable ROBBIALAC Etch Primers with good surface preparation and proper application.

Designed use

Designed Use:

  1. It is strongly recommended for metal Roofs constituting mild steel, or Galvanized surfaces

Availability:

  1. Standard shades are available Red, Green and as per customer requirement.

Coverage:

  1. The theoretical coverage of ROBBIALAC ROOF PAINT would be approximately 8 – 9 M²/liter at a Dry film thickness of 30 µ

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation

Surface Preparation:                                                                                                                             

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness
  3. Ensure that the surface to be painted is free from dust, and other loose flakes that would be detrimental in the proper application
  4. For steel and other metal ensure that the ROBBIALAC SHIELD RED OXIDE PRIMER is applied prior to and adequate drying is allowed
  5. Apply ROBBIALAC ETCH PRIMER as the final preparation coat for ROBBIALAC ROOF PAINT top coat
  6. Apply two to three coats of top coat as required
  7. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Thinning recommendation:

  1. ROBBIALAC GP THINNER and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC GP THINNER and dry them immediately after application

Pack Sizes:

  1. Available in metal tins of 1 and 4 liter packs

 

× Lets Chat