- Required for removing previously painted surfaces or for corrective purposes
- Solvent based
- Penetrates into the dry film and lifts the coating by a stripping action
- The thixotropic nature of the product does not allow it to flow away from the target area and therefore allows maximum penetration
Designed Use:
- Can be used on previously painted enamel and water based substrates
Availability:
- As per customer requirement.
Coverage:
- The spreading of ROBBIALAC PAINT REMOVER would be approximately 5-10 M² /liter.
*Due consideration must be given to the extent of previously painted surfaces and the nature of the substrate.
- Remove all dust and moieties and apply one coat of ROBBIALAC PAINT REMOVER
- Allow for 10-15 minutes for penetration time
- Accordingly scrape off the old paint film
- For stubborn areas repeat the same process mentioned above and scrape the loose matter
Method of application:
- By roller/brush and ensuring rubber gloves and protective goggles are worn at all times
Thinning recommendation:
- No thinning required.
Pack Sizes:
- Available in plastic pails of 1 and 4L packs