• Premium grade of paint based on a modified resin system and metallic gold flakes to provide an appealing finish for short term protection and also for various decorative purposes
  • Forms a tough durable and hardwearing finish
  • It has excellent flow, hiding power and good gloss retention properties

Designed Use

  1. It is strongly recommended as decorative enamel for interiors and mild exterior conditions as a top coat
    1. Wooden surfaces : Doors, Windows, Furniture and Cabinets
    2. Metals surfaces : Grills and Masonry walls

Availability:

  1. As per customer requirement.

Coverage:

  1. The theoretical coverage of ROBBIALAC LUSTRE GOLD would be approximately 8 – 10 M² liter at a Dry film thickness of 15 – 20 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate

 

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness and proper application.
  3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
  1. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC WOOD PRIMER should be used to provide through binding of ROBBIALAC LUSTRE GOLD top coat
  2. Steel and other metals:
    1. ROBBIALAC SHIELD RED OXIDE PRIMER is used as initial surface preparation to provide anti-rust properties
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding properties for ROBBIALAC LUSTRE GOLD top coat
  3. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application

Thinning recommendation:

  1. ROBBIALAC G.P THINNER and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes:

  1. Available in metal tins of 1 and 4L packs
× Lets Chat