Home ROBBIALAC INDUSTRIAL ENAMEL

ROBBIALAC INDUSTRIAL ENAMEL

Industrial Enamel

  • Based on a modified alkyd system
  • Excellent build up, quick drying and good flow properties
  • Extremely rich in pigmentation like Titanium Dioxide and other light fast pigments, which gives a rich finish
  • The product gives a tough, highly durable and hardwearing finish

Designed use

Designed Use:

  1. It is strongly recommended as Enamel for interiors and mild exterior conditions as a top coat
    1. Metals and steel structures: grills and primed masonry walls
    2. Can also be used on wooden surfaces: doors, windows, furniture and cabinets

Availability:

  1. As per customer requirement.

Coverage:

  1. The theoretical coverage of ROBBIALAC INDUSTRIAL ENAMEL would be approximately 8 – 10 M² /liter at a Dry film thickness of 30 µ

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation

Surface preparation:

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness and proper application.
  3. The surface to be painted needs to be clear of all grease, laitance and fungal growth
  4. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC WOOD PRIMER should be used to provide through binding of Super Gloss top coat
  5. Steel and other metals:
    1. ROBBIALAC SHIELD RED OXIDE PRIMER is used as initial surface preparation to provide anti-rust properties
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding properties for Industrial Enamel top coat
  6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Thinning recommendation:

  1. ROBBIALAC G.P THINNER and to the extent of maximum of 10% of the paint.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.

Pack Sizes:

  1. Available in metal tins in 1 and 4L packs
× Lets Chat