Robbialac Hammer Finish Enamel
- Based on a modified alkyd resin system
- Extremely rich in pigmentation like Aluminum paste and other color pigments, which gives a rich finish
- The product gives a tough, highly durable and hardwearing finish
- Excellent build up, quick drying and good flow properties
Designed Use:
- It is strongly recommended as Enamel for interiors and mild exterior conditions as a top coat
- Metals and steel structures: grills and office cabinets & industrial machines
Availability:
- As per customer requirement.
Coverage:
- The theoretical coverage of ROBBIALAC HAMMER FINISH ENAMEL would be approximately 8 – 10 M² /liter at a Dry film thickness of 30 µ
*Due consideration must be given to the evenness of the surface and the nature of the substrate.
Surface preparation:
- Avoid humid conditions >95% and also dew point of <3% for application
- The expected life span is directly related to the surface cleanliness and proper application.
- The surface to be painted needs to be clear of all grease, laitance and fungal growth
- Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.
*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application.
- To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC INDSUTRIAL THINNER and dry them immediately after application.
Thinning recommendation:
- ROBBIALAC INDSUTRIAL THINNER and to the extent of maximum of 10% of the paint by volume.
- Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.
Pack Sizes:
- Available in metal tins of 4L packs