Floor Paint (Enamel)
- Good film build up and upon drying it forms a tough film that is long lasting and holds sufficient weathering properties
- Adequate level of pigmentation and carefully selected extenders that help in providing good abrasion resistance and toughness to combat medium traffic movement
- Designed on a synthetic alkyd resin with good flow and quick drying properties
Designed Use:
- Mainly for internal/external areas prone to light-medium traffic
- Cemented floor
- Pave blocks
- Walk ways
- Not to be used in areas prone to heavy traffic and vehicle movement
Availability:
- Standard shades are available Red, Green and as per customer requirement.
Coverage:
- The theoretical coverage of ROBBIALAC FLOOR PAINT would be approximately 8 – 9 M²/lit at a Dry film thickness of 40 µ.
*Due consideration must be given to the evenness of the surface and the nature of the substrate.
Surface preparation:
- Avoid humid conditions >95% and also dew point of <3% for application
- The expected life span is directly related to the surface cleanliness
- It is therefore mandatory to remove the grease, oil, wax by solvent cleaning
- Any external contamination, cement / concrete spills, salts can be removed by dry brush, chipping, needle gun or spot blast
- For stubborn surfaces, it is recommended to use an acid washing followed with a thorough water wash
- Apply an initial coat of ROBBIALAC FLOOR PAINT with a thinning recommendation of 20% of ROBBIALAC GP THINNER
- Final coat of ROBBIALAC FLOOR PAINT should be applied with a maximum thinning recommendation of 10% of paint
*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application.
- To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC GP THINNER and dry them immediately after application
Thinning recommendation:
- ROBBIALAC GP THINNER and to the extent of maximum of 10% of the paint on final coat
- Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.
Pack Sizes:
- Available in metal tins of 1 and 4 liter