Epilac Zinc Chromate Primer (Base & Hardener)
- Epoxy based primer with high molecular Epoxy Resin and a suitable Catalyst and rust inhibitive pigments
- By virtue of its Epoxy constituent it gives very good adhesion and good resistance to Mild Acids, Bases and other Chemicals
- Good build up and has outstanding Anticorrosive Properties
- It is practically the most popular product for many coatings on Steel and other Metals with suitable surface preparation for short and medium term protection
Designed Use:
- It is recommended as a Blast Primer for Tanks exteriors, structural Steelwork, Chemical plant Pipelines, over head Cranes, various steels structures and other metals
- It is recommended for both external as well as internal Designed Use
Availability:
- As per customer requirement.
Coverage:
- The theoretical coverage of ROBBIALAC EPILAC ZINC CHROMATE PRIMER 2K would be approximately 6 – 8 M² /liter per coat at a Dry film thickness of 40 – 60 µ per coat
Surface preparation:
- Avoid Humid Condition > 95 %. Not suitable for perpetual wet conditions
- The product will not cure below 10°c, dry heat resistance is 120°c.
- Remove the grease, oil, and wax by solvent cleaning
- Apply one to two coats of EPILAC ZINC CHROMATE PRIMER 2K as required, followed by ROBBIALAC EPILAC ENAMEL topcoat
Method of application:
- By roller/brush and if large areas are to be painted one can use suitable spray application
- To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC EPILAC THINNER and dry them immediately after application
Thinning recommendation:
- ROBBIALAC EPILAC THINNER and to the extent of maximum of 10-15% of the paint by volume.
- Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components
Pack Sizes:
- Available in 3L, in 4L metal tins.