Home ROBBIALAC EPILAC FLOOR PAINT (Base & Hardener)

ROBBIALAC EPILAC FLOOR PAINT (Base & Hardener)

Epilac Floor Paint (Base & Hardener)

  • Good flow and outstanding mechanical properties
  • Good wear and tear resistance
  • High build coating based on modified Epoxy Resins to form a two component product cured with an appropriate catalyst
  • Being an Epoxy based composition the resulting coating system exhibits excellent resistance to moderate conditions of acidic, bases and various other Chemicals

Designed use

Designed Use:

  1. It is strongly recommended for long-term protection of light to moderate traffic accompanied with good chemical resistance
  2. Industrial Floors, Chemical Industries, Process Industries, Storage Areas, Car Parks etc.,
  3. It is recommended for both external as well as internal usage

Availability:

  1. Available as per customer requirement

Coverage:

  1. The theoretical coverage of ROBBIALAC EPILAC FLOOR PAINT would be approximately 6 – 8 M²/liter per coat at a Dry film thickness of 100 -125 µ per coat

Surface preparation

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness and proper application.
    1. It is therefore mandatory to remove the grease, oil, wax by solvent cleaning
    2. Any external contamination, cement / concrete spills, salts can be removed by dry brush, chipping, needle gun or spot blast
    3. For stubborn surfaces, it is recommended to use an acid washing followed with a thorough water wash
  3. Mix the base and hardener for the ROBBIALAC EPILAC FLOOR PAINT immediately before application
    1. Ensure the paint it stirred well
    1. Apply one or two coats of ROBBIALAC EPILAC FLOOR PAINT as required

    *Not suitable for perpetual wet conditions. The product will not cure below 10°c, dry heat resistance is 120°c. 

Method of application

Thinning recommendation:

  1. ROBBIALAC Epilac thinner and to the extent of maximum of 10% of the paint
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Method of application:

  1. By soft cloth or brush
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P thinner and dry them immediately after application.

Pack Sizes:

  1. Available in plastic pails in 4/20 liter
× Lets Chat