Home ROBBIALAC ENAMEL UNDERCOAT WHITE

ROBBIALAC ENAMEL UNDERCOAT WHITE

Enamel Undercoat White

  • Premium quality modified alkyd-based undercoat
  • Suitably selected pigments forming a good composition that ensures a good build
  • Good drying properties providing a smooth matt finish

Designed use

Designed Use:

  1. It is strongly recommended as an undercoat for interiors and exterior conditions for enamel top coats
    1. Wooden surfaces: doors, windows, furniture and cabinets
    2. General substrates: cemented walls and gypsum partitions

Availability:

  1. Available as per requirement

Coverage:

  1. The theoretical coverage of ROBBIALAC ENAMEL UNDERCOAT WHITE would be approximately 7 – 9 M²liter at a Dry film thickness of 30 µ

 

Surface preparation

Surface Preparation:

  1. Cemented walls/Gypsum partitions:
    1. The surface to be prepared needs to be clear of all grease, laitance and fungal growth
    2. For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected area
    3. STUCCO PUTTY-EXTERIOR/INTERIOR can be applied to fill all cracks and surface undulation for smooth surface
    4. We recommend applying one coat of ENAMEL UNDERCOAT WHITE to provide thorough binding of enamel top coat
    5. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above
  2. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding of enamel top coats

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.

Thinning recommendation:

  1. ROBBIALAC G.P THINNER and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components

Pack Sizes:

  1. Available in metal tins of 1 and 4 liter packs
× Lets Chat