- Formulated on a combination of synthetic alkyd resin in combination with a hard resin to enhance the insulating properties of the product
- It is specially recommended as an insulating varnish for mild voltages for the electrical gadgets especially the windings on motors, transformers and similar applications
- Designed Use ensures that there is a net gain in power utility
Designed Use:
- It is strongly recommended for use as an insulation solution for medium and low voltage components in domestic power Designed Use
- Can be used on motor winding, transformers, circuit boards
- The temperatures should not however be higher than 90 °c
Availability:
- Available as per requirement
Coverage:
- The theoretical coverage of ROBBIALAC ELECTRICAL INSULATING VARNISH would be approximately 10 – 12 M²/liter at a Dry film thickness of 20 µ.
*Due consideration must be given to the evenness of the surface and the nature of the substrate.
Surface preparation:
- Avoid humid conditions >95% and also dew point of <3% for application
- The expected life span is directly related to the surface cleanliness and proper application.
- Ensure that the surface to be painted is free from dust and other loose flakes that would be detrimental in the proper application
- One or two coats can be applied as required
Method of application:
- By soft cloth or brush
- To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC INDUSTRIAL THINNER and dry them immediately after application.
Thinning recommendation:
- ROBBIALAC INDUSTRIAL THINNER and to the extent of maximum of 5-10% of the paint by volume.
- Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.
Pack Sizes:
- Available in metal tins in ½, 1 and 4 liter packs