Home ROBBIALAC CONTRACTOR EMULSION (INTERIOR)

ROBBIALAC CONTRACTOR EMULSION (INTERIOR)

Contractor Emulsion (Interior)

  • High quality co-polymer based latex paint formulated with Titanium Dioxide and other light fast pigments
  • Able to withstand certain amount of resistance to scrub and wash ability
  • Gives a smooth matt finish

Designed use

Designed Use:

  1. Can be used for interior purpose only.

Availability:

  1. Is available in white and various shade range as per BERGER shade card

Coverage:

  1. The theoretical coverage of ROBBIALAC CONTRACTOR EMULSION is approximately 7-8 M² liter at a Dry film thickness of 30 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation

  1. The surface to be painted needs to be clear of all grease, laitance and fungal growth
  2. For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected areas.
  3. STUCCO PUTTY-EXTERIOR can be applied to fill all cracks and surface undulation for smooth surface
  4. We recommend applying one coat of ROBBIALAC ACRYLIC PRIMER UNDERCOAT WHITE to provide thorough binding of ROBBIALAC CONTRACTOR EMULSION top coat
  5. Two to three coats of ROBBIALAC CONTRACTOR EMULSION can be applied as required, giving three to four hours gap between coats
  6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above

Method of application

Thinning recommendation

  1. Soft water and to the extent of maximum of 10% of the paint by volume

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in Luke warm water and dry them immediately after application

Pack Sizes:

  1. Available in plastic pails of 4/20 liter packs
× Lets Chat