Home ROBBIALAC BLACK/GREEN BOARD PAINT

ROBBIALAC BLACK/GREEN BOARD PAINT

Black/Green Board Paint

  • Popular grade of enamel paint used for painting the board for display or writing in educational institutions or hoardings
  • Based on a modified Synthetic Alkyd based formulation
  • Good pigmentation that is tough and also gives good scratch resistance
  • Extremely good abrasion
  • It has long life and resists chalk marking to a great extent
  • Economic option to alternate writing boards
  • Exhibits good film build up with a matt finish

Designed use

Designed Use:

  1. Strongly recommended as a single option for writing on boards of various end uses inclusive of class Rooms, hoardings, and other display areas
  2. Recommended for both indoor and outdoor applications
  3. Useful for both metallic as well as wooden boards with suitable undercoats

Availability:

  1. Available only in black/Green color

Coverage:

  1. The theoretical coverage of ROBBIALAC BLACK/GREEN BOARD PAINT would be approximately 6 – 8 M² /liter at a Dry film thickness of 30 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation

Surface preparation:

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness and proper application.
  3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
  4. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC WOOD PRIMER should be used to provide through binding of BLACK BOARD PAINT top coat
  5. Steel and other metals:
    1. ROBBIALAC SHIELD RED OXIDE PRIMER is used as initial surface preparation to provide anti-rust properties
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding properties for BLACK BOARD PAINT top coat
  6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

Method of application

Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P thinner and dry them immediately after application.

Thinning recommendation:

  1. ROBBIALAC G.P thinner and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes:

  1. Available in metal tins of ½, 1 and 4 liter
× Lets Chat