ROBBIALAC ACRYLIC BINDER CLEAR (INTERIOR/EXTERIOR)

Specially designed co-polymer water based primer formulated for adequate anchoring of the subsequent coats for porous substrates
It is not pigmented and has got good alkali resisting properties
The special property of the binder acts by suitably penetrating the pores and seals the civil structures
Suitable for old and new concrete surfaces and exhibits good adhesion
Available in interior and exterior formulation

Designed Use:

Availability:

Coverage:

The theoretical coverage of ROBBIALAC ACRYLIC BINDER would be approximately 8 – 10 M²/liter at a Dry film thickness of 25 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.

Surface preparation:

Avoid humid conditions >95% and also dew point of <3% for application
The surface to be painted needs to be clear of all grease, laitance and fungal growth
For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected areas
Apply an initial coat of ROBBIALAC ACRYLIC BINDER to provide thorough binding properties for the stucco
STUCCO PUTTY-INTERIOR/EXTERIOR can be applied to fill all cracks and surface undulation for smooth surface
We recommend applying one coat of ROBBIALAC ACRYLIC BINDER CLEAR to provide thorough binding of any ROBBIALAC water based top coat
Do not apply directly on surfaces containing previous coats of enamel paint
Do not dilute the primer with any liquids

Method of application:

By roller/brush and if large areas are to be painted one can use suitable spray application
To keep the brush/roller and spray equipment in good condition for use, clean the same in luke warm water and dry them immediately after application

Thinning recommendation:

Soft water and to the extent of maximum of 10 – 15% of the paint by volume.
Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes: